Product: aluminum circle
Alloy: AA5052
Temper: O, H12, H14, H16, H18, H22, H24, H26, H28
Thickness: 0.4-3.0mm
Diameter: 100-1500mm
Temper designation (For Reference)
|
Temper |
Definition |
|
O |
Annealed |
|
H12 |
Strain Hardened, 1/4 Hard |
|
H14 |
Strain Hardened, 1/2 Hard |
|
H16 |
Strain Hardened, 3/4 Hard |
|
H18 |
Strain Hardened, Full Hard |
|
H22 |
Strain Hardened and Partially Annealed, 1/4 Hard |
|
H24 |
Strain Hardened and Partially Annealed, 1/2 Hard |
|
H26 |
Strain Hardened and Partially Annealed, 3/4 Hard |
|
H28 |
Strain Hardened and Partially Annealed, Full Hard |
5xxx series aluminum products are commonly applied in many industries. They are of low density, high tensile strength and high ductility. They are lighter than other alloy with the same area.
Application
5xxx series aluminum wafer can be processed into lighter products, they are highly resistant to corrosion.
|
Type |
Application |
|
Advanced Cookware |
Anti-stick Pan, Rice Cooker Internal Pot, etc. |
|
Machine Parts |
Pressure Container Parts, Vehicle Parts, etc. |
|
Other |
Transportation, Electronic Appliance, Consumer Goods, etc. |
Diameter Tolerance
|
Nominal Diameter |
Tolerance |
|
Multiple of 5mm |
+/- 0.5mm |
|
Not multiple of 5mm |
+/- 3.0mm |
Surface Protection: With PE/PVC coating on main side (if specified)
5xxx series aluminum products contain 3%-5% magnesium, so they are also called magaluma alloy. 5052 alloy aluminum discs are of excellent strength, high forming performance, good corrosion resistance. They are often applied as machine parts, like hardwares, vehicle parts, ship boards, etc.
Alloy designation (For Reference)
Comparison of Alloy Designations for Aluminum flat Products
|
Alloy Series |
Chinese Standard |
American Standard |
European Standard |
|
5xxx Series |
5052 |
5052 |
EN AW-5052 |
Chemical Compositing
Chemical Composition conforms to Chinese, American and European standard specification (For Reference)
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others:Each |
Others:Total |
Al:Min. |
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2-2.8 |
0.15-0.35 |
0.10 |
- |
0.05 |
0.15 |
remainder |
