Product: aluminum circle
Alloy: 1050
Temper: O, H12, H14, H16, H18, H22, H24, H26, H28
Thickness: 0.4-3.0mm
Diameter: 100-1500mm
Diameter Tolerance
Aluminium disc 1050 possesses good ductility, the final products size can be slightly different because of the temper. But the tolerance range is very small, according to the form below.
|
Nominal Diameter |
Tolerance |
|
Multiple of 5mm |
+/- 0.5mm |
|
Not multiple of 5mm |
+/- 3.0mm |
Surface Protection: With PE/PVC coating on main side (if specified)
1050 aluminium circle possesses high aluminum content, they are the most applied alloy on the market and relatively cheaper. Aluminium circles 1050 are of high flexibility, corrosion-resistant, and good conductivity to the electricity and heat.
Temper designation (For Reference)
1050 aluminium disc main temper is O, but we can customize the temper as our customers' requirements.
|
Temper |
Definition |
|
O |
Annealed |
|
H12 |
Strain Hardened, 1/4 Hard |
|
H14 |
Strain Hardened, 1/2 Hard |
|
H16 |
Strain Hardened, 3/4 Hard |
|
H18 |
Strain Hardened, Full Hard |
|
H22 |
Strain Hardened and Partially Annealed, 1/4 Hard |
|
H24 |
Strain Hardened and Partially Annealed, 1/2 Hard |
|
H26 |
Strain Hardened and Partially Annealed, 3/4 Hard |
|
H28 |
Strain Hardened and Partially Annealed, Full Hard |
Alloy designation (For Reference)
1050 aluminium circle of XieNuo Aluminum Company is produced according to the standards of chinese GB.
|
Alloy Series |
Chinese Standard |
American Standard |
European Standard |
|
1xxx Series |
1050 |
- |
- |
Chemical Compositing
Chemical Composition conforms to Chinese, American and European standard specification (For Reference). The aluminium circle 1050 contains 99.5% of aluminum.
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others:Each |
Others:Total |
Al:Min. |
|
1050 |
0.25 |
0.40 |
0.05 |
0.05 |
0.05 |
- |
0.05 |
0.05 |
0.03 |
- |
99.5 |
The 1050 aluminium disc is the most common aluminum products on the market. We can make machine parts of particular characteristic out of aluminium disc 1050. Like gaskets or decorations, or other conductive machine components. The products can be put together by contact welding or gas welding.
Application
1050 aluminum wafer is of good cold-work-molding characteristic, the elongation is between 35%-38%, it's stable and better-valued.
|
Type |
Application |
|
Common Cookware |
Pan Lid, Kettle, Induction Cooker Cladding, etc. |
|
Lamps and Lantern Parts |
Lamp shade, Lamp Cup, etc. |
|
Construction Material |
Traffic Guideboard, Building Decorations, etc. |
|
Other |
Transportation, Electronic Appliance, Consumer Goods, etc. |
