Diameter Tolerance
Because the 1060 aluminium wafers possess good ductility, so there is a little tolerance after the annealing. You see the difference in the form below.
Nominal Diameter |
Tolerance |
Multiple of 5mm |
+/- 0.5mm |
Not multiple of 5mm |
+/- 3.0mm |
Surface Protection: With PE/PVC coating on main side (if specified)
Aluminum disc 1060 possesses high aluminum content. It is the most widely applied alloy on the market and relatively cheaper. 1060 aluminum disc is of high flexibility, corrosion-resistant, good conductivity to electricity and heat.
Temper designation (For Reference)
Temper |
Definition |
O |
Annealed |
H12 |
Strain Hardened, 1/4 Hard |
H14 |
Strain Hardened, 1/2 Hard |
H16 |
Strain Hardened, 3/4 Hard |
H18 |
Strain Hardened, Full Hard |
H22 |
Strain Hardened and Partially Annealed, 1/4 Hard |
H24 |
Strain Hardened and Partially Annealed, 1/2 Hard |
H26 |
Strain Hardened and Partially Annealed, 3/4 Hard |
H28 |
Strain Hardened and Partially Annealed, Full Hard |
Alloy designation (For Reference)
Tradematt Aluminum Company can provide our customers with certified quality of aluminium circle. Our aluminium wafer can produced according to both chinese standard and american standard.
Alloy Series |
Chinese Standard |
American Standard |
European Standard |
1xxx Series |
1060 |
1060 |
- |
Chemical Compositing
Aluminum disk 1060 is almost pure aluminum. There are little other elements in the aluminium circles. So they have their unique pros and cons during the applications.
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others:Each |
Others:Total |
Al:Min. |
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
- |
0.05 |
0.03 |
0.03 |
- |
99.6 |
aluminum circle 1060 is one of the most common aluminum products on the market. We can make kitchenware and lamp parts out of these aluminum disc 1060. Or other conductive machine components. The products can be put together by contact welding or gas welding.
Application
The common usage of aluminium discs are in the processing of cookwares, lampshades and sign boards. The elongation of aluminium disc is usually between 35%-38%, it's stable and better-valued.
Type |
Application |
Common Cookware |
Pan Lid, Kettle, Induction Cooker Cladding, etc. |
Lamps and Lantern Parts |
Lamp shade, Lamp Cup, etc. |
Construction Material |
Traffic Guideboard, Building Decorations, etc. |
Other |
Transportation, Electronic Appliance, Consumer Goods, etc. |